Table of Contents
Advertisement
Configure the settings for start IP address (the IP address is allocated in sequence),
subnet mask, default gateway, user name, and password.
Enable the Add function to add the devices into the Added Device area.
Click Apply to save the settings.
5.6.1.7 Exporting IP Address
You can export the added IP address to the USB storage device.
The exported information is saved in .csv file, which includes IP address, port number, channel
number, manufacturer, user name, and password.
Insert the USB storage device to the USB port of the Device.
Click Export.
The Browse interface is displayed. See Figure 5-80.
Configure the save path.
Click OK to save the settings.
A pop-up message indicating "Successfully exported" is displayed.
Click OK.
5.6.1.8 Importing IP Address
You can add remote devices by importing IP address information.
Insert the USB storage device to the USB port of the Device.
Click Import.
The Browse interface is displayed. See Figure 5-81.
Local Configurations 100
Advertisement
Table of Contents
