Table of Contents
Advertisement
After you have configured the video recording settings, on the Record interface, click
Next.
The SNAPSHOT interface is displayed. See Figure 5-28.
Configure the snapshot settings parameters. See Table 5-10.
Parameter
Channel
Event type
Period
Copy
Click Finished.
A pop-up message is displayed.
Click OK.
The live view screen is displayed. The setting up with startup wizard is completed. You
can start using the Device.
Live View
5.2
After you logged in the Device, the live view is displayed. See Figure 5-29. The number of
channels displayed depends on your model.
To enter the live view screen from other interfaces, click
Description
In the Channel list, select a channel to take a snapshot.
Select the check box of the event type which includes General, MD,
Alarm, MD&Alarm, Intel, and POS.
Define a period during which the configured snapshot setting is active.
For details about defining a period, see "5.1.4.9 Configuring Recorded
Video Storage Schedule."
Click Copy to copy the settings to other channels.
on the top right of the screen.
Local Configurations 51
Advertisement
Table of Contents
