Configuring Security Settings - Dahua Smart 1U User Manual

5.18.3 Configuring Security Settings

To ensure the network security and protect data, you can configure the access permission to
the Device from host IP (host IP means the PC or server that has an IP).
White list includes the host IP that are permitted to access the Device.

Back list includes the host IP that are not permitted to access the Device.

Updata time white list includes the host IP that are permitted to sync the Device time.

5.18.3.1 Configuring Access Right
Select Main Menu > SYSTEM > SECURITY > Access Right.
The Access Right interface is displayed. See Figure 5-227.
Configure the settings for the security parameters. See Table 5-71.
Parameter
Type
Enable
Start Address
Add IP Address
End Address
Description
In the Type list, you can select Limits of network-whitelist, Limits
of network-blacklist, or Updata time-whitelist.
Enable the security settings.
Enter a single IP address or a start IP address of a network
segment.
Click Add IP Address to add a single IP address.
Enter the end IP address of a network segment.
Local Configurations 238