E Model - Dahua Smart 1U User Manual

2.2.2 E Model

2.2.2.1 Installing Battery
The battery is only provided with some models.
1. Put the battery cable through the hole.
2.2.2.2 Installing HDD
Skip step 6 if the battery is not equipped with the model you purchased.
1. Remove the screws to take
off the cover.
4. Match the holes on the
bracket with the screw
holes on HDD.
2. Connect to the cable into the port.
2. Remove the screws to take
off the bracket.
5. Use screws to fix the HDD
onto the bracket.
3. Put the HDD onto the
bracket.
6. (Optional) Put the
battery cable through
the hole to connect into
the cable port.
Getting Started 5