Table of Contents
Advertisement
No.
Server IP Address
Port
Sub Service ID
Click Apply to complete the settings.
5.14.1.11 Configuring Alarm Center Settings
You can configure the alarm center server to receive the uploaded alarm information. To use
this function, the Alarm Upload check box must be selected. For details about alarm event
settings, see "5.10 Alarm Events Settings."
Select Main Menu > NETWORK > ALARM CENTER.
The ALARM CENTER interface is displayed. See Figure 5-178.
Configure the settings for the alarm center parameters. See Table 5-64.
Parameter
Enable
Protocol Type
Host IP
Port
Select a number.
Enter the server IP address or the server domain that you want to
register to.
Enter the port of the server.
This ID is allocated by the server and used for the Device.
Description
Enable the alarm center function.
In the Protocol Type list, select protocol type. The default is
ALARM CENTER.
The IP address and communication port of the PC installed with
alarm client.
Local Configurations 201
Advertisement
Table of Contents
