Configuring The Recording And Snapshot Schedule; Configuring Hdd Manager - Dahua DH-XVR5416L-X User Manual

5.18.2 Configuring the Recording and Snapshot Schedule

The system starts recording and taking snapshot according to the configured schedule. For
details, see "5.1.4.9 Configuring Recorded Video Storage Schedule" and "5.1.4.10 Configuring
Snapshot Storage Schedule."

5.18.3 Configuring HDD Manager

You can view the HDD information, format HDD, and configure the HDD type through HDD
manager.
Step 1 Select Main Menu > STORAGE > HDD MANAGER.
The HDD MANAGER interface is displayed. See Figure 5-238.
In the table, you can view the information of current HDD, such as device name, HDD
type, status, total space and free space, and serial number of the HDD port.
Step 2 Configuring the settings for the HDD manager.
 HDD type setting: In the Type list, select Read/Write, Read-Only or Redundant,
and then click Apply to save the settings.
HDD format: Select the HDD that you want to format, click Format, in the pop-up

message, click OK to start formatting, and then following the onscreen message to
complete formatting.
Figure 5-238
Local Configurations 271