The RS232 interface is displayed. See Figure 5-226.
Configure the settings for RS232 port parameters. See Table 5-70.
Parameter
Description
In the Function list, select the protocol for the port.
Function
The default setting is Console.
In the Baudrate list, select a value for baudrate length. The default
Baudrate
setting is 115200.
Data Bits
In the Data Bits list, select 5, 6, 7, or 8. The default setting is 8.
Stop Bits
In the Stop Bits list, select 1, 1.5, or 2.
In the Parity list, select None, Odd, Even, Mark, or Null. The
Parity
default setting is None.
Click Apply to complete the settings.
Console: Debug by connecting a mini terminal software.
Keyboard: Control the Device by connecting a dedicated
keyboard.
Adapter: Transit data by connecting to PC.
Protocol COM: This function is for card overlay.
NetKeyboard: Control the Device by connecting a dedicated
keyboard to the LAN port.
PTZ Matrix: Connect the video matrix for control.
Local Configurations 237