Table of Contents
Advertisement
Click Apply to complete the settings.
After the Device is connected to a Wi-Fi hotspot, in the Wi-Fi Working Info area, the
current hotspot, IP address, subnet mask, and default gateway are displayed.
5.14.1.4 Configuring PPPoE Settings
PPPoE is another way for the Device to access the network. You can establish network
connection by configuring PPPoE settings to give the Device a dynamic IP address in the WAN.
To use this function, firstly you need to obtain the user name and password from the Internet
Service Provider.
Select Main Menu > NETWORK > PPPoE.
The PPPoE interface is displayed. See Figure 5-170.
Enable the PPPoE function.
In the User Name box and Password box, enter the user name and password
accordingly provided by the Internet Service Provider.
Click Apply to complete the settings.
The system pops up a message to indicate the successfully saved. The IP address
appears on the PPPoE interface. You can use this IP address to access the Device.
When the PPPoE function is enabled, the IP address on the TCP/IP interface cannot be
modified.
Local Configurations 191
Advertisement
Table of Contents
