Installing Device Into Rack - Dahua Smart 1U User Manual

4. Turn the device to see the
back side of it. Aim the
screws of the HDD at the
holes on the back of the
device, and then fix the
screws.

Installing Device into Rack

2.3
Only 1.5U and 2U Devices support this installation.
To install the DVR into Rack, do the following:
Check if the in-house temperature is lower than 35℃(95℉) and make sure the 15cm
(6in.) spacing around the Device for ventilation.
Use six screws to fix the DVR on each side.
Install from the bottom up.
If you want to install more accessories to the rack, take preventive measures to avoid power
socket overload.
Install more accessories to the rack if needed.
5. Use the HDD cable and
power cable to connect
HDD and mainboard.
6. Put back the cover and fix
the screws.
Getting Started 7