Table of Contents
Advertisement
Define the period by editing. Take Sunday as an example.
Click
The Period interface is displayed. See Figure 5-27.
Enter the time frame for the period and select the event check box.
There are six periods for you to set for each day.
Under Copy, select All to apply the settings to all the days of a week, or select
Click Apply to save the settings.
Click Apply to complete the settings.
Click Copy to copy the settings to other channels.
After configuring the recording schedule settings, you need to perform the
following operations to start recording according to the defined schedule.
5.1.4.10 Configuring Snapshot Storage Schedule
You can configure the storage schedule for the snapshot such as channels to take snapshot,
alarm settings, and the armed period.
You can also configure snapshot storage settings by selecting Main Menu > STORAGE >
SCHEDULE > Snapshot.
Select the check box of event type, and then click
period.
When selecting MD&Alarm, the respective check box of MD and Alarm will be
cleared.
.
specific day(s) that you want to apply the settings to.
Enable the alarm event and cofigure the settings for the recording channel.
For details, see "5.10 Alarm Events Settings."
You need to enable the recording function, see "5.9.1 Enabling Record
Control."
to clear the defined
Local Configurations 50
Advertisement
Table of Contents
