Table of Contents
Advertisement
5.4.4.3 Calling Patterns
On the Expanded PTZ Control Panel, in the No. box, enter the value of the pattern that
you want to call.
Call
The PTZ camera moves according to the configured pattern repeatedly.
Click
5.4.4.4 Calling AutoScan
On the Expanded PTZ Control Panel, in the No. box, enter the value of the border that
you want to call.
Click
The PTZ camera performs scanning according to the configured borders.
Click
5.4.4.5 Calling AutoPan
On the Expanded PTZ Control Panel, click
Click
5.4.4.6 Using AUX Button
On the Expanded PTZ Control Panel, click
Figure 5-56.
In the Direct Aux list, select the option that corresponds to the applied protocol.
In the Aux Num box, enter the number that corresponds to the AUX switch on the decoder.
5.4.5 Calling OSD Menu
For the coaxial camera, you can call the OSD menu through the Expanded PTZ Control Panel.
See Figure 5-55.
to call the pattern.
again to stop calling the pattern.
.
again to stop auto canning.
again to stop moving.
to start moving in horizontal direction.
, the AUX setting interface is displayed. See
Local Configurations 79
Advertisement
Table of Contents
