5.10.3 Face Detection
You can configure the face detection settings and search the detected faces in the defined time
period.
5.10.3.1 Configuring Face Detection Settings
When the Device detects the human faces, the system activates alarms.
Not all models support this function.
Smart IPC must be equipped with face detect function.
Select Main Menu > FACE DETECT > Parameters.
The Human Face interface is displayed. See Figure 5-127.
Configure the settings for the face detection parameters. See Table 5-41.
Parameter
Channel
Target Filter
Enable
Description
In the Channel list, select a channel to set the face detection.
Click Setting to draw areas to filter the target.
You can configure two filtering targets (maximum size and
minimum size). When the target is smaller than the minimum size
or larger than the maximum size, no alarms will be activated. The
maximum size should be larger than the minimum size.
Enable or disable the face detection function.
Local Configurations 146