Working With Ptz Control Panel - Dahua Smart 1U User Manual

Click Apply to save the settings.
Click Copy to copy the settings to other channels.

5.4.2 Working with PTZ Control Panel

PTZ control panel performs the operations such as directing camera in eight directions,
adjusting zoom, focus and iris settings, and quick positioning.
Basic PTZ Control Panel
Right-click on the live view screen and then select PTZ. The PTZ control panel is displayed.
See Figure 5-49.
The functions with buttons in gray are not supported by the system.
Parameter
Speed
Zoom
Focus
Iris
PTZ movement
Description
Controls the movement speed. The bigger the value is, the faster the
movement will be.
: Wide angle.
: Long shot.
: Zoom in.
: Zoom out.
: Small.
: Large.
Supports eight directions.
Fast positioning button.
Positioning: Click
then click anywhere on the live view screen, the PTZ will turn to
this point and move it to the middle of the screen.
Zooming: On the fast positioning screen, drag to draw a square on
to enter the fast positioning screen, and
Local Configurations 74