Removing An Mda; Connections And Configurations - Alcatel-Lucent 7450 ESS-1 Installation Manual

Removing an MDA

Changing the MDA Configuration
If you replace an MDA with a different type, you must change the configuration to reflect the new
MDA type prior to the installation. Each active port must be shut down in order to shut down and
remove an MDA configuration. Refer to the 7450 ESS OS System Guide for details on configuring
cards, MDAs, and ports.
Issue the following commands in the
from the configuration:
Step 1
Step 2
*NOTE: The
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10 card-type card-type
Step 11 no shutdown
Step 12 mda mda-slot
Step 13 mda-type mda-type
Step 14 no shutdown
Step 15 exit
7450 ESS-1
Command
port port-id*
shutdown
port>no shutdown
exit
card slot-number
mda mda-slot
shutdown
exit
no mda mda-slot
card slot-number

Connections and Configurations

context to shut down ports and remove the MDA
config
Example
port 1/1/1
shutdown
command must be entered on all enabled ports on the MDA.
exit
card 1
mda 1
shutdown
exit
no mda 1
card 1
card-type iom-20g
no shutdown
mda 1
mda m10-1gb-sfp
no shutdown
exit
Page 79