Data Management - YASKAWA DX100 Instructions Manual

157449-1CD
Data Transmission
Function

5.1.2 Data Management

5 Host Control Function of DX100
5.1 File Data Transmission Function
The jobs for the DX100 may refer to another job or condition data
according to instructions. When saving a single job or condition data to
the host computer, the correspondence between job and files should be
controlled.
To reduce this labor, the related jobs and condition data can be
transmitted in a batch as the related job data.
When specification of "related job data" is made, the master job, the
related job, and the related condition data are transmitted sequentially.
The header number and the subcode number indicate that the related job
data are added.
Refer to the header number list.
5-4
65 of 125
RE-CKI-A456