For Using Data Transmission Function; Remote Mode - YASKAWA DX100 Instructions Manual

157449-1CD
Data Transmission
Function
2

For Using Data Transmission Function

2.1

2.1.1 Remote Mode

2 For Using Data Transmission Function
2.1 Remote Mode
Remote Mode
The data transmission function can be used with DX100 in remote mode.
To use the data transmission function, set DX100 to remote mode.
In remote mode, the operation is ordered from a host computer ; whereas
in local mode, teach mode, and play mode, the programming pendant is
used for operating the system.
To switch to the remote mode or the local mode, either
1. Set the mode key on the programming pendant to [REMOTE].
– The remote mode has two sub-modes ; "I/O remote enable" and
"Command remote enable".
– Which sub-mode takes effect in remote mode is set in the pseudo
input display.
For details, refer to chapter 8 "Remote Function Setting".
SUPPLE-
MENT
Play mode
2-1
REMOTE TEACH
PLAY
Teach mode
 I/O remote enable
 Command remote enable
Remote mode
17 of 125
RE-CKI-A456