YASKAWA DX100 Instructions Manual page 35

157449-1CD
Data Transmission
Function
3 DCI Function
3.4 Registering DCI Instruction
– The cursor moves to the instruction list dialog while the cursor in the
address area changed to an underline.
The instruction where the cursor is positioned is displayed with the
previously registered additional items in the input buffer line.
5. Change the additional items and variable data.
– <To register items as displayed in the input buffer>
(1) Perform operation described in the step 6 below.
– <To edit any additional items>
(1) With the cursor on the instruction to be registered, press
[SELECT].
– The cursor moves to the input buffer line.
• Changing a numerical value data of additional items
I) Move the cursor to the additional item whose numerical value
is to be changed. Pressing simultaneously [SHIFT] and the cur-
sor key increments or decrements the value.
II) To enter a value by pressing the number key, press [SELECT]
to display the input line.
Enter a value, then press [ENTER]. The value displayed in the
input line is changed.
3-7
35 of 125
RE-CKI-A456