Concurrent Tasks From Multiple Jobs - YASKAWA DX100 Instructions Manual

Data Transmission
Function
3.5
3 DCI Function

3.5 Concurrent Tasks from Multiple Jobs

Concurrent Tasks from Multiple Jobs
As an option, commands related to DCI function can be executed from
more than one job simultaneously. The operations are explained below.
• The DCI related commands can be executed in any job regardless of
distinction among the ordinary job, concurrent job (option), or job
activated in series (option).
• Multiplexing of DCI transmission function is not supported.
Therefore, it is impossible to manipulate files on two or more external
memory units (such as personal computer) connected to the DX100.
• If two or more commands related to DCI function are issued
concurrently, the execution starts after completion of processing of
the currently executing command. Therefore, if a module issues a
command request while another module is executing DCI function,
the request has to wait until the ongoing processing completes.
3-10
157449-1CD
38 of 125
RE-CKI-A456