Lathe Chuck Protection With Position Switch; Lathe Chuck Key; Safety Check - Optimum Optiturn TU 2506 Operating Manual

1.9.3 Lathe chuck protection with position switch

The lathe is provided with a lathe chuck
protection. The lathe
switched on if the lathe chuck protection
is closed.

1.9.4 Lathe chuck key

The lathe is equipped with a special key
for chucks. Once the lathe chuck key has
been released, it is pushed out of the
lathe chuck by a spring.
CAUTION!
Only operate the lathe using this key.
1.10

Safety check

Check the lathe regularly.
Check all safety devices

before starting work,

once a week,

after every maintenance and repair work.
General check
Equipment
Protective covers,
lathe chuck protection
Signs, Markings
Safety
Version 1.0.1 2014-05-16
can only be
Lathe chuck pro-
Lathe chuck
protection
integrated
Position switch
Safety lathe chuck
Check
Mounted, firmly bolted and not damaged
Installed and legible
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
tection
closed
open
Img.1-4: Lathe chuck protection
key
Img.1-5: Lathe chuck key
TU2506 | TU2506V | TU2807 | TU2807V
OK
GB
Page 91