Authorized Personnel; Obligations Of The Operating Company; Obligations Of The Operator; Additional Requirements Regarding The Qualification - Optimum Optiturn TU 2506 Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
Qualified personnel
Due to their professional training, knowledge and experience as well as their knowledge of rele-
vant regulations the qualified personnel is able to perform the assigned tasks and to recognise
and avoid any possible dangers themselves.
Instructed person
Instructed personnel were instructed by the operating company about the assigned tasks and
any possible risks in case of improper behaviour.

1.5.2 Authorized personnel

WARNING!
Inappropriate operation and maintenance of the machine constitutes a danger for the
personnel, objects and the environment.
Only authorized personnel may operate the machine!
Persons authorized to operate and maintain should be trained technical personnel and instruct-
ed by the ones who are working for the operating company and for the manufacturer.

1.5.3 Obligations of the operating company

The operator must instruct the staff at least once per year regarding

all safety standards that apply to the machine.

the operation,

accredited technical guidelines.
The operator must also

check personnel's state of knowledge,

document the trainings/instructions,

require personnel to confirm participation in training/instructions by means of a signature,

check whether the personnel is working safety- and risk-conscious and observe the operat-
ing instructions.

1.5.4 Obligations of the operator

The operator must

have read and understood the operating manual,

be familiar with all safety devices and regulations,

be able to operate the machine.

1.5.5 Additional requirements regarding the qualification

For work on electrical components or equipment, there are additional requirements:

Must only be performed by a qualified electrician or person working under the instructions
and supervision of a qualifiedelectrician.

Before carrying out work on electrical components or operating units, the following meas-
ures must be taken, in the order given.

disconnect all poles.

Secure against switching on.

Check if the machine is zero potential.
1.6

Operators positions

The operator's position is in front of the machine.
GB TU2506 | TU2506V | TU2807 | TU2807V
Page 88 Original operating instructions
Safety
Version 1.0.1 2014-05-16