Reasonably Foreseeable Misuses; Avoiding Misuses; Possible Dangers Caused By The Machine - Optimum Optiturn TU 2506 Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
In order to achieve optimum cutting performance, it is essential to choose the right turning tool,
feed, tool pressure, cutting speed and coolant.

"Standard values for cutting data when turning" on page 126
WARNING!
Heaviest injuries through improper use.
It is forbidden to make any modifications or alternations to the operation values of the
lathe. They could endanger employees and cause damage to the lathe.
INFORMATION
The TU2506V and TU2807V is built according to the standard DIN EN 55011 class A.
WARNING!
The class A (machine tools) is not intended to be used in residential facilities, where the
power is supplied via a public low voltage supply system. In these areas it may possibly
be difficult to guarantee electromagnetic compatibility due to lead bound as well as
emitted interferences.
ATTENTION!
If the lathe is not used as intended or if the safety directives or the operating instructions
are ignored the liability of the manufacturer for any damages to persons or objects
resulting hereof is excluded and the claim under guarantee is becoming null and void!
1.3

Reasonably foreseeable misuses

Any other use as the one determined under the "Intended use" or any use beyond the
described use shall be deemed as not in conformity and is forbidden.
Any other use has to be discussed with the manufacturer.
It is only allowed to process metal, cold and non-inflammable materials with the lathe.
In order to avoid misuse, it is necessary to read and understand the operating instructions
before the first commissioning.
The operators must be qualified.

1.3.1 Avoiding misuses


Use of suitable cutting tools.

Adapting the speed adjustment and feed to the material and workpiece.

Clamp workpieces firmly and vibration-free.
1.4

Possible dangers caused by the machine

The lathe has undergone a safety inspection (analysis of danger with assessment of risks). It
has been designed and built on the basis of this analysis using the latest technological advanc-
es.
Nonetheless, there remains a residual risk, since the machine operates with

high revolutions,

rotating parts,

with electrical voltages and currents.
We have used construction resources and safety techniques to minimize the health risk to per-
sonnel resulting from these hazards.
If the lathe is used and maintained by the staff who are not duly qualified, there may be a risk
resulting from incorrect or unsuitable maintenance of the lathe.
GB TU2506 | TU2506V | TU2807 | TU2807V
Page 86 Original operating instructions
Safety
Version 1.0.1 2014-05-16