Storage; Installation And Assembly; Requirements Regarding The Installation Site - Optimum Optiturn TU 2506 Operating Manual

3.3

Storage

ATTENTION!
In case of wrong and improper storage electrical and mechanical machine components
might get damaged and destroyed.
Store packed and unpacked parts only under the intended environmental conditions.
Follow the instructions and information on the transport case:

Fragile goods
(Goods require careful handling)

Protect against moisture and humid environment

"Environmental conditions" on page 95.

Prescribed position of the packing case
(Marking of the top surface - arrows pointing to the
top)

Maximum stacking height
Example:not stackable - do not stack a second pack-
ing case
on top of the first packaging case
Consult Optimum Maschinen Germany GmbH if the machine and accessories are stored for
more than three months or are stored under different environmental conditions than those given
here .
3.4

Installation and assembly

3.4.1 Requirements regarding the installation site

ATTENTION!
Before you install the machine let the capacity of the floor loading check by an expert.
The floor or ceiling of the hall must carry the weight of the machine plus any additional
parts and auxiliary equipment, as well as operator and stockpiled materials. If necessary,
the floor must strengthened.
INFORMATION
In order to attain good functionality and a high processing accuracy as well as a long durability
of the machine the installation site should fulfil certain criteria.
Please observe the following points:

The device must only be installed and operated in a dry and well-ventilated place.

Avoid places nearby machines generating chips or dust.

The installation site must be free from vibrations also at a distance of presses, planing
machines, etc.
Assembly
Version 1.0.1 2014-05-16
TU2506 | TU2506V | TU2807 | TU2807V
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
GB
Page 103