Qualification Of Personnel; Target Group - Optimum Optiturn TU 2506 Operating Manual

INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must

be duly qualified,

strictly follow these operating instructions.
Always disconnect the machine if cleaning or maintenance work is being carried out.
WARNING!
The lathe may only be used with the safety devices activated.
Disconnect the lathe immediately whenever you detect a failure in the safety devices or
when they are not mounted!
All additional installations carried out by the operator must incorporate the prescribed
safety devices.
This is your responsibility being the operating company!

"Safety measures during operation" on page 89
1.5

Qualification of personnel

1.5.1 Target group

This manual is addressed to

the operating companies,

the operators,

the personnel for maintenance works.
Therefore, the warning notes refer to both operation and maintenance of the machine.
Always disconnect the machine plug from the mains. This will prevent it from being used by un-
authorized persons.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must

be duly qualified,

strictly follow these operating instructions.
In the event of improper use

there may be a risk to the personnel,

there may be a risk to the machine and other material values,

the correct function of the lathe may be affected.
The qualifications of the personnel for the different tasks are mentioned below:
Operator
The operator is instructed by the operating company about the assigned tasks and possible
risks in case of improper behaviour. Any tasks which need to be performed beyond the opera-
tion in the standard mode must only be performed by the operator if it is indicated in these
instructions and if the operating company expressively commissioned the operator.
Electrical specialist
Due to his professional training, knowledge and experience as well as his knowledge of respec-
tive standards and regulations the electrical specialist is able to perform works on the electrical
system and to recognise and avoid any possible dangers himself.
The electrical specialist is specially trained for the working environment in which he is working
and knows the relevant standards and regulations.
Safety
Version 1.0.1 2014-05-16
TU2506 | TU2506V | TU2807 | TU2807V
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
GB
Page 87