Other Pictograms; Intended Use - Optimum Optiturn TU 2506 Operating Manual

1.1.2 Other pictograms

Warning danger of
slipping!
Warning tilting dan-
ger!
Use protective
gloves!
1.2

Intended use

WARNING!
In the event of improper use, the lathe

will endanger personnel,

the machine and other material property of the operating company will be endan-
gered,

the correct function of the machine may be affected.
The machine is designed and manufactured to be used in environments where there is no po-
tential danger of explosion.
The lathe is designed and manufactured for straight turning and facing round and regular
formed three-, six- or twelve-square workpieces in cold metal, castings and plastics or similar
materials that do not constitute a health hazard or do not create dust, such as wood, Teflon®.
The lathe must only be installed and operated in a dry and ventilated place. The clamping
workpieces in the feed may only be effected with the supplied the special key for chucks.
If the lathe is used in any way other than described above, modified without authorization of
Optimum Maschinen Germany GmbH, then the lathe is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee or CE conformity will expire due to any constructive
technical or procedural changes which had not been performed by the company Optimum
Maschinen Germany GmbH.
It is also part of intended use that you

the operating manual is constantly observed,

the inspection and maintenance instructions are observed.

observe the limits of the drilling machine,

"Technical data" on page 94
Safety
Version 1.0.1 2014-05-16
Caution, danger of Warning of auto-
explosive substances!
Disconnect the mains
plug!
Use protective boots! Use protective suit!
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
Warning hot surface!
matic start-up!
Use protective Use ear protection!
glasses!
Protect the environ-
TU2506 | TU2506V | TU2807 | TU2807V
Warning biological
hazard!
Use protective
gloves!
Contact address
ment!
GB
Page 85