Danfoss VLT AQUA FC 200 Series Programming Manual page 85

®
VLT AQUA Drive Programming Guide
5-93 Pulse Out #27 Bus Control
Range:
0.00 %* [0.00 - 100.00 %]
5-94 Pulse Out #27 Timeout Preset
Range:
0.00 %* [0.00 - 100.00 %]
5-95 Pulse Out #29 Bus Control
Range:
0.00 %* [0.00 - 100.00 %]
5-96 Pulse Out #29 Timeout Preset
Range:
0.00 %* [0.00 - 100.00 %]
5-97 Pulse Out #X30/6 Bus Control
Range:
0.00 %* [0.00 - 100.00 %]
5-98 Pulse Out #X30/6 Timeout Preset
Range:
0.00 %* [0.00 - 100.00 %]
Function:
Contains the frequency to apply to the digital output terminal 27, when it is configured as [Bus
Controlled].
Function:
Contains the frequency to apply to the digital output terminal 27, when it is configured as [Bus
Controlled Timeout] and timeout is detected.
Function:
Contains the frequency to apply to the digital output terminal 29, when it is configured as [Bus
Controlled].
Function:
Contains the frequency to apply to the digital output terminal 29, when it is configured as [Bus
Controlled Timeout] and timeout is detected
Function:
Contains the frequency to apply to the digital output terminal 27, when it is configured as [Bus
Controlled.
Function:
Contains the frequency to apply to the digital output terminal 6, when it is configured as [Bus Con-
trolled Timeout] and time-out is detected.
®
MG.20.O4.02 - VLT is a registered Danfoss trademark
2 Parameter Description
2
85