Danfoss VLT AQUA FC 200 Series Programming Manual page 7

®
VLT AQUA Drive Programming Guide 1 How to Programme
1
Navigation Keys
The four navigation arrows are used to navigate between the different
choices available in [Quick Menu], [Main Menu] and [Alarm Log].
Use the keys to move the cursor.
[OK]
is used for choosing a parameter marked by the cursor and for enabling
the change of a parameter.
Operation Keys
for local control are found at the bottom of the control panel.
130BP046.10
7
®
MG.20.O4.02 - VLT is a registered Danfoss trademark