Danfoss VLT AQUA FC 200 Series Programming Manual page 30

2 Parameter Description
0-37 Display Text 1
Range:
0 N/A* [0 - 0 N/A]
2
0-38 Display Text 2
Range:
0 N/A* [0 - 0 N/A]
0-39 Display Text 3
Range:
0 N/A* [0 - 0 N/A]
2.2.6 LCP Keypad, 0-4*
Enable, disable and password protect individual keys on the LCP.
0-40 [Hand on] Key on LCP
Option:
[0] Disabled
[1] * Enabled
[2] Password
0-41 [Off] Key on LCP
Option:
[0] Disabled
[1] * Enabled
[2] Password
30
Function:
In this parameter it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If to be displayed permanently select Display Text 1 in par. 0-20
Line 1.1 Small Display Line 1.2 Small
, par. 0-21
Line 2 Large Display Line 3 Large
or par. 0-24
◀ ▶
character. Use the and buttons to move the cursor. When a character is highlighted by the
▲
cursor, it can be changed. Use the
can be inserted by placing the cursor between two characters and pressing
Function:
In this parameter it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If to be displayed permanently select Display Text 2 in par. 0-20
Line 1.1 Small , par. 0-21 Display Line 1.2 Small
Line 2 Large Display Line 3 Large
or par. 0-24
◀ ▶
character. Use the and buttons to move the cursor. When a character is highlighted by the
cursor, this character can be changed. A character can be inserted by placing the cursor between
▲ ▼
two characters and pressing or .
Function:
In this parameter it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If to be displayed permanently select Display Text 3 in par. 0-20
Line 1.1 Small ,par. 0-21 Display Line 1.2 Small
Line 2 Large Display Line 3 Large
or par. 0-24
◀ ▶
character. Use the and buttons to move the cursor. When a character is highlighted by the
cursor, this character can be changed. A character can be inserted by placing the cursor between
▲ ▼
two characters and pressing or .
Function:
No function
[Hand on] Key enabled
Avoid unauthorized start in Hand mode. If par.0-40
Personal Menu, then define the password in par.0-65
Main Menu Password
the password in par.0-60
Function:
No function
[Off] Key is enabled
Avoid unauthorized stop. If par.0-41
Personal Menu, then define the password in par.0-65
Password. Otherwise define the password in par.0-60
word.
®
MG.20.O4.02 - VLT is a registered Danfoss trademark
®
VLT AQUA Drive Programming Guide
Display Line 1.3 Small
, par. 0-22
▲ ▼
. Use the or buttons on the LCP to change a
▼
or buttons on the LCP to change a character. A character
, par. 0-22 Display Line 1.3 Small
▲ ▼
. Use the or buttons on the LCP to change a
, par. 0-22 Display Line 1.3 Small
▲ ▼
. Use the or buttons on the LCP to change a
[Hand on] Key on LCP
Personal Menu Password
.
[Off] Key on LCP
0-41 [Off] Key on LCP is included in the My
Personal Menu Password
Main Menu Password
Display
Display
, par. 0-23
▲ ▼
or .
Display
, par. 0-23 Display
Display
, par. 0-23 Display
is included in the My
. Otherwise define
0-65 Personal Menu
0-60 Main Menu Pass-