Danfoss VLT AQUA FC 200 Series Programming Manual page 146

2 Parameter Description
[16] Thermal warning
[17] Mains out of range
[18] Reversing
[19] Warning
2
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
15-13 Logging Mode
Option:
[0] * Log always
[1] Log once on trigger
15-14 Samples Before Trigger
Range:
50 N/A* [0 - 100 N/A]
2.14.4 15-2* Historic Log
View up to 50 logged data items via the array parameters in this parameter group. For all parameters in the group, [0] is the most recent data and [49]
the oldest data. Data is logged every time an
of the following areas:
1. Digital input
2. Digital outputs (not monitored in this SW release)
3. Warning word
4. Alarm word
5. Status word
6. Control word
7. Extended status word
146
Function:
Log always
Select [0] for continuous logging.
Log once on trigger
Select [1] to conditionally start and stop logging using par.15-12
Event and par.15-14 Samples Before Trigger
Function:
Enter the percentage of all samples prior to a trigger event which are to be retained in the log. See
Trigger Event
also par.15-12 and par.15-13
event occurs (not to be confused with SLC events).
®
MG.20.O4.02 - VLT is a registered Danfoss trademark
®
VLT AQUA Drive Programming Guide
.
Logging Mode
.
Events in this context are defined as a change in one
Trigger