Recovery For Windows System - NEC BladeServer Express5800 Series User Manual

RECOVERY FOR Windows SYSTEM

If any file necessary for running the operating system is damaged, use the following procedures to
recover the system.
IMPORTANT:
Make sure that the keyboard, display unit, DVD-ROM drive, and
floppy disk drive are connected to the CPU blade.
After recovering the system, see "Updating the System" in Chapter
5 to update the system.
Also, you need to update all the drivers after the system update. For
more information, see "Installing and Setting Device Drivers" in
Chapter 5.
If the hard disk drive cannot be recognized, you can not recover the
system.
Use the keyboard only when the USB floppy disk drive is not being
accessed (the access lamp is being off).
For Windows Server 2003 x64 Editions
If the system fails to start for some reason, repair the system using the recovery console. Note that
this method is recommended only for users and administrators who have a thorough knowledge of
the recovery console.
For more information, refer to Online Help.
For Windows Server 2003
If the system fails to start for some reason, repair the system using the recovery console. Note that
this method is recommended only for users and administrators who have a thorough knowledge of
the recovery console.
For more information, refer to Online Help.
Troubleshooting 8-23