Wan Settings; Dynamic Ip (Dhcp) - D-Link DAP-1360 User Manual

Section 3 - Configuration
WAN settings are only used in the WISP Client Router wireless mode and the WISP Repeater wireless mode. Choose Dynamic
IP(DHCP) to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP number
to use. This option is commonly used for Cable modem services.
Host Name: The Host Name is optional but may be
required by some ISPs.
MTU Size:
Y o u m a y n e e d t o c h a n g e t h e M T U
(Maximum Transmission Unit) for optimal
performance with your specific ISP. The
default MTU size is 1500.
Attain DNS
Select this option if you want the DAP-1360
automatically: to get the DNS (Domain Name System)
server IP address automatically.
Set DNS manually: Select this option if you want to manually
enter the DNS Server IP address(es). The
fields to enter the Primary and Secondary
DNS server IP addresses will appear after
you have selected this option.
Primary/ Secondary
Enter the Primary and Secondary DNS server IP address assigned by your ISP.
DNS Server:
The default MAC address is set to the Ethernet MAC address your DAP-1360. You can click the Clone Your PC's
Clone MAC address:
MAC Address button to replace the AP's MAC address with the MAC address of the PC that you used to register with
your ISP. It is not recommended that you change the default MAC address unless required by your ISP.
D-Link DAP-1360 User Manual

WAN Settings

Dynamic IP (DHCP)

52