AudioCodes Mediant 1000B User Manual page 228

3. Click New; the following dialog box appears:
4. Configure additional DHCP Options for the DHCP server according to the parameters
described in the table below.
5. Click Apply.
Table 15-4: DHCP Option Table Parameter Descriptions
Parameter
Index
dhcp option
[DhcpOption_Index]
DHCP Server Index
dhcp-server-number
[DhcpOption_DhcpServerIndex]
Option
option
[DhcpOption_Option]
Type
type
[DhcpOption_Type]
Value
value
[DhcpOption_Value]
User's Manual
Figure 15-3: DHCP Option Table - Add Dialog Box
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Associates the DHCP Option table entry with a DHCP server that
you configured in ''Configuring the DHCP Server'' on page 221.
Note: Currently, only one DHCP server (Index 0) can be configured
and therefore, the parameter is always set at 0.
Defines the code of the DHCP Option.
The valid value is 1 to 254. The default is 159.
For example, for DHCP Option 150 (Cisco proprietary for defining
multiple TFTP server IP addresses), enter the value 150.
Defines the format (type) of the DHCP Option value that is
configured in the 'Value' parameter (see below).

[0] ASCII = (Default) Plain-text string (e.g., when the value is a
domain name).

[1] IP address = IPv4 address.

[2] Hexadecimal = Hexadecimal-encoded string.
For example, if you set the 'Value' parameter to "company.com",
you need to set the 'Type' parameter to ASCII.
Defines the value of the DHCP Option. For example, if you are
using Option 66, the parameter is used for specifying the TFTP
provisioning server (e.g., http://192.168.3.155:5000/provisioning/).
The valid value is a string of up to 256 characters. By default, no
value is defined. For IP addresses, the value can be one or more
Mediant 1000B Gateway & E-SBC
Description
228 Document #: LTRT-27055