AudioCodes Mediant 1000B User Manual page 275

User's Manual
Parameter
Path
rest-path
[HTTPRemoteServices_Path]
Status
http-service-state
[HTTPRemoteServices_Service
Status]
Connection
Policy
http-policy
[HTTPRemoteServices_Policy]
Persistent Connection
http-persistent-
connection
[HTTPRemoteServices_Persist
entConnection]
Number of Sockets
Version 7.2

[5] QoS = QoS-based call routing. For more information, see
Configuring QoS-Based Routing by Routing Server on page
282.
Note:

You can configure only one remote Web service for each of the
following service types: Routing, Call Status, Topology
Status, and QoS.

For the Topology Status option to be functional, you must
enable the functionality (see ''Enabling Topology Status
Services'' on page 279).

If you do no configure the parameter to QoS, the device sends
QoS reports to the Topology server.

The Routing option also includes the Call Status and Topology
Status services.

Currently, the Capture option is not supported.
Defines the path (prefix) to the REST APIs.
The valid value is a string of up to 80 characters. The default is
"api".
(Read-only) Displays the status of the host associated with the
Web service.

"Connected": At least one of the hosts is connected.

"Disconnected": All hosts are disconnected.

"Not In Service": Configuration of the service is invalid.
Defines the mode of operation when you have configured multiple
remote hosts (in the HTTP Remote Hosts table) for a specific
remote Web service.

[0] Round Robin = (Default) Load balancing of traffic across all
configured hosts. Every consecutive message is sent to the next
available host.

[1] Sticky Primary = Device always attempts to send traffic to
the first (primary) host. If the host does not respond, the device
sends the traffic to the next available host. If the primary host
becomes available again, the device sends the traffic to the
primary host.

[2] Sticky Next = Similar to Sticky Primary, but if the primary
host does not respond, the device sends the traffic to the next
available host and continues sending traffic to this host even if
the primary host becomes available again.
Defines whether the HTTP connection with the host remains open
or is only opened per request.

[0] Disable = Connection is not persistent and closes when the
device detects inactivity. The device uses HTTP keep-alive
messages to detect inactivity.

[1] Enable = (Default) Connection remains open (persistent)
even during inactivity. The device uses HTTP keep-alive / HTTP
persistent connection messages to keep the connection open.
Defines how many sockets (connection) are established per remote
275
Description
Mediant 1000B Gateway & E-SBC
15. Services