Enabling The Ldap Service; Enabling Ldap-Based Web/Cli User Login Authentication And Authorization - AudioCodes Mediant 1000B User Manual

User's Manual
For both of the previously discussed LDAP services, the following additional LDAP
functionality is supported:

Search method for searching DN object records between LDAP servers and within
each LDAP server (see Configuring LDAP Search Methods).

Default access level that is assigned to the user if the queried response does not
contain an access level.

Local Users table for authenticating users instead of the LDAP server (for example,
when a communication problem occurs with the server). For more information, see
''Configuring Local Database for Management User Authentication'' on page 255.

15.3.1 Enabling the LDAP Service

Before you can configure LDAP support, you need to enable the LDAP service.

To enable LDAP:
1. Open the LDAP Settings page (Setup menu > IP Network tab > RADIUS & LDAP
folder > LDAP Settings).
2. From the 'LDAP Service' drop-down list, select Enable.
3. Click Apply, and then reset the device with a save-to-flash for your settings to take
effect.
15.3.2 Enabling LDAP-based Web/CLI User Login Authentication and
Authorization
The LDAP service can be used for authenticating and authorizing device management
users (Web and CLI), based on the user's login username and password (credentials). At
the same, it can also be used to determine users' management access levels (privileges).
Before you can configure LDAP-based login authentication, you must enable this type of
LDAP service, as described in the following procedure.

To enable LDAP-based login authentication:
1. Open the Authentication Server page (Setup menu > Administration tab > Web &
CLI folder > Authentication Server).
Figure 15-17: Enabling LDAP-based Login Authentication
2. Under the LDAP group, from the 'Use LDAP for Web/Telnet Login' drop-down list,
select Enable.
3. Click Apply, and then reset the device with a save-to-flash for your settings to take
effect.
Version 7.2
Figure 15-16: Enabling LDAP
241 Mediant 1000B Gateway & E-SBC
15. Services