Read Ds204 Device Parameter 2 - Siemens SIMATIC ET 200SP Manual

Data sets
A.11 Read DS204 device parameter 2
A.11

Read DS204 device parameter 2

DS204 contains the second part of the incorrect parameters with which the motor starter is
working.
The defaults appear in italics in the Value range column.
Object
No.
18
-
2210
-
-
17
-
2213
2214
136
Byte.Bit Range of values
0.0 - 0.3 1 ... 7.5 s/0.5 s
[2 ... 15]
Default value is [2]: 1 s.
0.4 - 0.7 [0]: Reserved
1 0 ... 99 %/1 %
[0 ... 99]
Deactivated
[0]:
2 - 3 [0]: Reserved
4 - 5 [0]: Reserved
6 150 ... 1000 %/50 %
[3 ... 20]
Default value is [16]: 800 %
7 [0]: Reserved
8 18.75 ... 100 %/3.125 %
[6 ... 32]
[0]: Deactivated
Default value is [7]:
21.875 %
9 50 ... 400 %/3.125 %
[16 ... 128]
[0]: Deactivated
Default value is [36]:
112.5 %
Meaning See Chapter ...
Blocking time Blocking time and blocking
current (Page 56)
Reserved -
Warning limit - Overload protection
motor heating (Page 42)
Reserved -
Reserved -
Blocking current Blocking time and blocking
current (Page 56)
Reserved -
Lower current Upper/lower current warning
warning limit value (Page 55)
Upper current Upper/lower current warning
warning limit limit (Page 55)
Motor starter (3RK1308-0**00-0CP0)
Manual, 12/2016, A5E34821005002A/RS-AB/002