Siemens SIMATIC ET 200SP Manual page 88

Product overview
3.7 Functions
Procedure using STEP 7
Proceed as follows to perform an online firmware update with STEP 7:
1. Select the module in the device view.
2. Select the "Online & diagnostics" command from the shortcut menu.
3. Select the "Firmware update" group in the "Functions" folder.
4. Click the "Browse" button to select the path to the firmware update files in the "Firmware
update" area.
5. Select the suitable firmware file. The table in the firmware update area lists all modules
for which an update is possible with the selected firmware file.
6. Click the "Run update" button. If the module can interpret the selected file, the file is
downloaded to the module.
Note
If a firmware update is interrupted, you need to remove and insert the module before starting
the firmware update again.
Procedure using a SIMATIC memory card
Proceed as follows to perform a firmware update via the SIMATIC memory card:
1. Insert a SIMATIC memory card into the SD card reader of your programming device /
computer.
2. To save the update file on the SIMATIC memory card, mark the SIMATIC memory card in
the project navigator under "Card reader/USB memory".
3. Select the "Card Reader/USB memory > Create firmware update memory card"
command in the "Project" menu.
4. Use a file selection dialog to navigate to the firmware update file. In a further step you can
decide whether you want to delete the content of the SIMATIC memory card or whether
you want to add the firmware update files to the SIMATIC memory card.
5. Insert the SIMATIC memory card containing the firmware update files in the CPU.
Procedure using the Web server
The procedure is described in the Web server
(http://support.automation.siemens.com/WW/view/en/59193560) function manual.
88
Motor starter (3RK1308-0**00-0CP0)
Manual, 12/2016, A5E34821005002A/RS-AB/002