Declaration Of Conformity - Siemens SIMATIC ET 200SP Manual

Product-specific safety instructions

1.6 Declaration of conformity

1.6 Declaration of conformity
The manufacturer declares that the safety components of the fail-safe ET 200SP motor
starter series in the designs marketed by us comply with the applicable basic health and
safety requirements of the EC Directives* stated (including amendments), and that the stated
standards* were applied in their design and construction.
* You can download the complete EC Declaration of Conformity from the Internet
(http://www.siemens.com/sirius/approvals) as a PDF.
Standards
The table below shows the standards that each of the ET 200SP motor starters comply with:
Standard
IEC 60947-4-2:2011-05
IEC 60947-4-3:2011-07
EN 62061: 2005
EN ISO 13849-1:2015
IEC 61508-1:2010
IEC 61508-2:2010
IEC 61508-3:2010
14
Direct-on-line Reversing
starter starter
x
x
-
-
-
-
-
Fail-safe
direct-on-line starter
x x
- -
- x
- x
- x
- x
- x
Manual, 12/2016, A5E34821005002A/RS-AB/002
Fail-safe
reversing starter
x
-
x
x
x
x
x
Motor starter (3RK1308-0**00-0CP0)