Chapter 3 - Commissioning
Name
AL
PW
ET
WLNK
* After power-up of the ODU, all LEDs illuminate until self-test has completed.
Bar LEDs
LED 1 (green) is On
LED 2 (green) is On
LEDs 2-3 (green) are On
LEDs 2-4 (green) are On
LEDs 2-5 (green) are On
LEDs 2-6 (green) are On
LEDs 2-7 (green) are On
LEDs 2-8 (green) are On
LEDs 2-9 (green) are On
BreezeMAX PRO 5000 CPE
Table 3-2: SAU LEDs
Description
Alarm indication
Power indication
Ethernet link status
indication
(Ethernet integrity)
Wireless link status
indication
Table 3-3: SAU LINK QUALITY LEDs Functionality
Aligning the PRO CPE's Internal Antenna
Functionality
Off - ODU is OK, diagnostic test passed
Red - ODU failure
Off - ODU is not powered or 3.3 VDC failure
Green - ODU power to SAU is OK
Off - No Ethernet connectivity has been
detected between the outdoor unit and the
device connected to the indoor unit's
Ethernet port
Green- Ethernet connectivity has been
detected between the outdoor unit and the
device connected to the indoor unit's
Ethernet port
Off - The SU is not connected with a BS
Orange on - The SU is connected with and
receives services from the BS (Network
Entry completed). Link Quality is indicated
by LEDs 1-9 as described in
below.
Blinking orange - Authentication failed
(LEDs 6, 7 and 8 on)
SNR
Wireless link is established.
5dB SNR < 9dB
10dB SNR < 14dB
15dB SNR < 19dB
20dB SNR < 23dB
SNR 24dB and RSSI < -72dBm
SNR 24dB and RSSI -72dBm
SNR 24dB and RSSI -69dBm
SNR 24dB and RSSI -60dBm
36
Table 3-3
.
Product Manual