Table 4-1: Intermediate Steps - Alvarion BreezeMAX PRO 5000 CPE Product Manual

Chapter 4 - Operation
The Intermediate Steps can be used to define additional frequencies using a finer
resolution. The intermediate steps are defined as follows:
NOTE
In the current version, intermediate steps are disabled.
Step
B0
B1
B2
B3
B4
B5
B6
B7
For example, if steps B0, B1 and B4 are enabled and all other steps are disabled,
the scanned frequencies are: Start Frequency, Start Frequency + 125 KHz, Start
Frequency + 500 KHz, Start Frequency +N*Main Step, Start Frequency +N*Main
Step + 125 KHz, Start Frequency +N*Main Step + 500 KHz (N=1, 2,...). End
Frequency is the upper limit for the scanned frequencies.
In addition, the Discrete Frequencies option enables defining up to 10 discrete
frequencies to be used in the scanning process in addition to the frequencies
defined by the Frequency Scanning parameters.
BreezeMAX PRO 5000 CPE

Table 4-1: Intermediate Steps

Effect on scanned frequencies set when Step is Enabled
Scan Start Frequency: Start Frequency is added to the set of "Main Frequencies"
Intermediate Step=125 KHz: All intermediate frequencies defined by "Main Frequency" +
125 KHz are added to the scanning set
Intermediate Step=250 KHz: All intermediate frequencies defined by "Main Frequency" +
250 KHz are added to the scanning set
Intermediate Step=375 KHz: All intermediate frequencies defined by "Main Frequency" +
375 KHz are added to the scanning set
Intermediate Step=500 KHz: All intermediate frequencies defined by "Main Frequency" +
500 KHz are added to the scanning set
Intermediate Step=625 KHz: All intermediate frequencies defined by "Main Frequency" +
625 KHz are added to the scanning set
Intermediate Step=750 KHz: All intermediate frequencies defined by "Main Frequency" +
750 KHz are added to the scanning set
Intermediate Step=875/1250 KHz: All intermediate frequencies defined by "Main
Frequency" + 1250 KHz are added to the scanning set.
68
Radio Parameters
Product Manual