Indoor SU-I and AU-I Units
Installing SU-I/I-D and AU-I/I-D
Units
Connectors and LEDs
The unit provides the following interfaces:
! An Ethernet connector (marked ETH) for connecting the unit to the
network. See Table 3-1‚ page 3-3 for information on the required
type of Ethernet cable.
! A TEL connector (Subscriber Units with voice support only) for
connecting a regular telephone.
! A DC-IN 5V connector for the power transformer.
! A MON connector for connecting an ASCII terminal with terminal
emulation software for configuration and maintenance purposes.
! Two ANT connectors for external antennas (SU-I-D/AU-I-D units
only)
Figure 3-1: SU-I Rear Panel
Figure 3-2:: SU-I/AU-I Side View
BreezeACCESS Version 4.5 System Manual
3-7