Alvarion BreezeMAX PRO 5000 CPE Product Manual page 98

Chapter 4 - Operation
For Ethernet CS mode:
Access VLAN: From 0 to 4095 or 4096 (Transparent). Transparent is used to

allow untagged packets. In the Change Service Parameters page, you can
change the Access VLAN as required. Click Modify to apply the changes.
Operation Mode: displays the convergence sublayer (CS) in the wireless access

network: IP CS (DSCP based classification) or Ethernet CS (VLAN based
classification). The operation mode is detected automatically.
For additional information on service configuration, refer to the BreezeMAX
Extreme System Manual.
BreezeMAX PRO 5000 CPE 81
Service Parameters
Product Manual