Atpc; Figure 4-15: Multi Rate And Atpc Parameters Page; Country Codes - Alvarion BreezeMAX PRO 5000 CPE Product Manual

Chapter 4 - Operation
4.9.2

ATPC

From the ATPC page, you can enable/disable the ATPC mechanism and select
your country code.
4.9.2.1 ATPC
To enable/disable the ATPC mechanism:
Select Disable to temporarily disable ATPC for testing purposes. You will be
1
prompted to enter the requested Tx Power. The available range depends on
unit type/radio band.
IMPORTANT
The maximum Tx power may vary depending on the country code applied and on applicable
regulations.
The default Tx Power is the last power level used before the ATPC algorithm
was disabled.
Click Apply.
2
Upon completing the test, enable ATPC to resume normal operation. If not
3
enabled manually, ATPC will be enabled automatically after the next reset or
when closing the web interface.
4.9.2.2

Country Codes

The country codes can be configured using two methods:
BreezeMAX PRO 5000 CPE

Figure 4-15: Multi rate and ATPC Parameters Page

73
ATPC Parameters
Product Manual