Chapter 4 - Operation
eCPE Manager IP Address (acquired from a DHCP server, or Not Available)
eCPE Manager Connection Status (Up, Down or Not Connected)
4.12.2 DHCP Client Configuration
The DHCP Client Configuration page enables viewing and updating the
parameters of the DHCP client.
Dhcp Client
Client IP Address
Network Mask
Default Gateway IP Address
TR069 Server IP Address
By default, DHCP Client is enabled (IP address allocated by DHCP), therefore
parameters cannot be modified.
To change the parameters in order to have static IP address for the CPE
management, select the Disable option, modify the values and click Apply.
NOTE
The DHCP Client can be set to disable only in ETH-CS service
BreezeMAX PRO 5000 CPE
Figure 4-21: Dhcp Client Configuration
83
Management Parameters
Product Manual