Alvarion BreezeMAX PRO 5000 CPE Product Manual page 83

Chapter 4 - Operation
»
»
»
»
BST/AU and Preferred BST/AU Parameters

»
»
»
»
»
After configuring the parameters, click Apply to save your changes.
Preferred BS Loss - Timeout before trying to connect to a preferred BS. This

value should vary between 30 minutes and 6 hours increasing dynamically by
30 minutes every time the timer expires, until reaching 6 hours.
»
»
After configuring the parameters, click Apply to save your changes.
BreezeMAX PRO 5000 CPE
Rx Frequency (KHz)
SNR (dB)
RSSI (dBm)
Bandwidth
BST/AU ID
BST/AU ID Mask
Preferred BST/AU ID
Preferred BST/AU ID Mask
Mobility Mode: enables defining the expected mobility of the CPE: Nomadic
or Mobile.
The default is Nomadic.
Min. Re-scan Timeout (min): (default 30)
Max. Re-scan Timeout (min): (default 360)
66
BST/AU Parameters
Product Manual