Alvarion BreezeMAX PRO 5000 CPE Product Manual page 72

Chapter 4 - Operation
Click Perform Action. Confirm the upload request and wait to receive a
4
success/failure message.
To perform configuration or country code file download:
Check that the required file is available in the TFTP Server directory in a PC
1
connected to the unit.
Typically it is recommended to configure the IP address of the PC to
2
192.168.154.250, which is the default TFTP Server IP address of the unit. If a
different IP address is configured in the PC with the TFTP server, configure the
TFTP Server IP address to the same address.
Enter the name of the configuration file (as called in the TFTP server), or
3
country code file (as provided by 4Motion) as the Configuration File Download
Name.
Select Download in the Choose Upload/Download Action field.
4
Click Perform Action. Confirm the download request and wait to receive a
5
success/failure message.
Following a successful download, reset the unit to apply the new
6
configuration.
The Configuration Control page includes the following control buttons:
Perform Action: executes the upload/download action.

Refresh: clears the screen.

Set Factory Defaults: click to reset the unit and revert to the default

configuration. To avoid unintentional actions you will be prompted to confirm
the request. All parameters except the Password will revert to the factory
default values.
BreezeMAX PRO 5000 CPE 55
Unit Control Parameters
Product Manual