Chapter 2 - Installation
2.1.4.2
Pole Mounting the ODU with the Tilt Accessory
Figure 2-3: ODU Pole Installation Using the Tilt Accessory, Vertical Polarization
To mount the ODU on a pole using the Tilt accessory:
Attach the Tilt accessory to the ODU using the two pairs of flat washers, spring
1
washers and nuts supplied in the Tilt kit.
Mount the Tilt accessory on a 1" to 4" pole using two 9/16" metal bands.
2
Release slightly the Tilt Control Screw, tilt the ODU downward/upward as
3
required, and re-tighten the screw.
BreezeMAX PRO 5000 CPE
18
Installing the ODU of the CPE
Product Manual