Table of Contents
Advertisement
Operation
OUTPUT Settings
The OUTPUT settings control the output that the internal scaler sends from DVI1 OUT. To access the
OUTPUT settings, follow the instructions below.
1.
Press the <SELECT> knob to enter the menu.
2.
Use the <SELECT> knob to select OUTPUT.
3.
Press the <SELECT> knob.
OUTPUT DETAIL
To view the current OUTPUT settings, do the following:
1.
Access the
OUTPUT
2.
Use the <SELECT> knob to select OUTPUT DETAIL.
3.
Press the <SELECT> knob.
OUTPUT FORMAT
The OUTPUT FORMAT settings set the resolution and frequency of the output. To access and adjust the
OUTPUT FORMAT, follow the instruction below.
1.
Access the
OUTPUT
2.
Use the <SELECT> knob to select OUTPUT FORMAT.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select either STANDARD (choose from a preset resolution and
frequency) or CUSTOM (set a custom resolution and frequency).
5.
Press the <SELECT> knob.
6.
If STANDARD:
a.
Use the <SELECT> knob to select from the list of standard resolutions and frequencies, from
800x600x60 to 1560x816x60.
b.
Press the <SELECT> knob.
If CUSTOM:
a.
Turn the <SELECT> knob to increase or decrease the width value.
b.
Press the <SELECT> knob.
c.
Turn the <SELECT> knob to increase or decrease the height value.
d.
Press the <SELECT> knob.
e.
Turn the <SELECT> knob to increase or decrease the resolution value.
f.
Press the <SELECT> knob.
g.
Repeat from step 4 if necessary to set the resolution and frequency as desired.
OUTPUT ADJUST
The OUTPUT ADJUST settings include the DVI MODE, BIT DEPTH, DATA RANGE, and DE ADJUST
settings. To access the OUTPUT ADJUST settings, do the following:
1.
Access the
OUTPUT
2.
Use the <SELECT> knob to select OUTPUT ADJUST.
3.
Press the <SELECT> knob.
DVI MODE
The DVI MODE selects DVI or HDMI mode. To set the DVI MODE, follow the instruction below.
1.
Access the
OUTPUT ADJUST
2.
Use the <SELECT> knob to select DVI MODE.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select either DVI or HDMI.
5.
Press the <SELECT> knob.
BIT DEPTH
The BIT DEPTH setting determines the quality of the video signal quantization. If the DVI MODE is set to
DVI, the BIT DEPTH will be 8 BIT. To adjust the BIT DEPTH when the DVI MODE is set to HDMI, do the
following:
1.
Access the
OUTPUT ADJUST
2.
Use the <SELECT> knob to select BIT DEPTH.
3.
Press the <SELECT> knob.
4.
Turn the <SELECT> knob to increase or decrease the value, from 8–12 BIT.
5.
Press the <SELECT> knob.
Vivid Drive 23N User Manual Rev. 1
Settings.
Settings.
Settings.
settings.
settings.
Page 14 of 31
Advertisement
Table of Contents
