Table of Contents
Advertisement
Operation
LOAD FROM
The LOAD FROM function loads previously saved configurations from one of the 10 SAVE slots. To load a
saved configuration, follow the instructions below.
1.
Access the
SAVE SETUP
2.
Use the <SELECT> knob to select LOAD FROM.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select a save slot to load, from SAVE 1–10.
5.
Press the <SELECT> knob.
DELAY CALL
The DELAY CALL setting is for use with multiple Vivid Drive 23N products, to offset start-up times. To set
the DELAY CALL, do the following:
1.
Access the
SAVE SETUP
2.
Use the <SELECT> knob to select DELAY CALL.
3.
Press the <SELECT> knob.
4.
Turn the <SELECT> knob to increase or decrease the interval, from 0–255s (seconds).
5.
Press the <SELECT> knob.
SYSTEM Settings
The SYSTEM settings include various functions such as backup and firmware updates. To access the
SYSTEM settings, follow the instructions below.
1.
Press the <SELECT> knob to enter the menu.
2.
Use the <SELECT> knob to select SYSTEM.
3.
Press the <SELECT> knob.
SYSTEM INFO
To view the SYSTEM INFO, do the following:
1.
Access the
SYSTEM
2.
Use the <SELECT> knob to select SYSTEM INFO.
3.
Press the <SELECT> knob.
TECH SUPPORT
To view phone numbers with which sales support can be contacted, follow the instructions below.
1.
Access the
SYSTEM
2.
Use the <SELECT> knob to select TECH SUPPORT.
3.
Press the <SELECT> knob.
DATE&TIME
The DATE&TIME menu displays the time and related statistics for the Vivid Drive 23N, and allows the date
and time to be set. To access, view, and enable or disable control of this menu, do the following:
1.
Access the
SYSTEM
2.
Use the <SELECT> knob to select DATE&TIME.
3.
Press the <SELECT> knob.
4.
Use the <SELECT> knob to select TIMING CONTROL.
5.
Press the <SELECT> knob.
6.
Use the <SELECT> knob to select either ON (enables control) or OFF (disables control).
7.
Press the <SELECT> knob.
CHANGE DATE
To set the date to be displayed by the Vivid Drive 23N, follow the instructions below.
1.
Access the
DATE&TIME
2.
Use the <SELECT> knob to select CHANGE DATE.
3.
Press the <SELECT> knob.
4.
Turn the <SELECT> knob to increase or decrease the year.
5.
Press the <SELECT> knob.
6.
Turn the <SELECT> knob to increase or decrease the month.
7.
Press the <SELECT> knob.
8.
Turn the <SELECT> knob to increase or decrease the day.
9.
Press the <SELECT> knob.
10. If necessary, repeat steps 2 to 9 until the date is set correctly.
Vivid Drive 23N User Manual Rev. 1
Settings.
Settings.
Settings.
Settings.
Settings.
menu and enable TIMING CONTROL.
Page 22 of 31
Advertisement
Table of Contents
