Table of Contents
Advertisement
Maintenance
5. Maintenance
Product Maintenance
Dust build-up reduces performance and can cause overheating. This can lead to reduction of the product's
life and/or mechanical wear. To maintain optimum performance and minimize wear, clean your products at
least twice a month. However, be aware that usage and environmental conditions could be contributing
factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1.
Unplug the product from power.
2.
Wait until the product is at room temperature.
3.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
4.
Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5.
Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6.
Softly drag any dirt or grime to the outside of the transparent surface.
7.
Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Vivid Drive 23N User Manual Rev. 1
Page 28 of 31
Advertisement
Table of Contents
