Table of Contents
Advertisement
NovaLCTMars Software
The Vivid Drive 23N can be configured by a computer running the NovaLCTMars software, through a USB
connection. You can download the NovaLCTMars software from
23n/.
Software Setup
To install and access all functions of the NovaLCTMars software:
1.
Download the NovaLCTMars software from www.chauvetdj.com/products/vivid-drive-23n/.
2.
Run the setup file.
3.
After installing the application and all included drivers, connect the Vivid Drive 23N and run the
software.
4.
Click User (U) in the menu running across the top of the window to open the drop-down menu.
5.
Click Advanced User Login (A).
6.
Type admin into the password field, and press the Login button on the screen, or press the Enter
key.
Connect the Vivid Drive 23N to the computer before running NovaLCTMars.
Screen Configuration
The NovaLCTMars software has many configuration settings for any panel assembly connected to the
Vivid Drive 23N. The options are divided into 3 tabs that appear on a window after clicking Screen
Configuration, selecting the product under Current Operation Communication Port, and clicking the
Next button.
Sending Card Tab
On the Sending Card tab, the resolution and refresh rate can be set. From this tab the product's
redundancy can be set, system configurations can be saved, and the product can also be restored to
factory default settings.
Receiving Card Tab
On the Receiving Card tab, the parameters sent to the software the last time this tab was viewed will be
displayed. This tab displays many options that can be edited, but Chauvet does NOT recommend altering
any of them. From this tab the firmware for connected video panels can be uploaded and downloaded.
Screen Connection Tab
On the Screen Connection Tab, there are three options for configuring the size of the connected panel
assembly, the distribution between video output ports, and the data flow: Simple, Standard, and Complex.
•
Simple Screen mode selects from preset data paths.
•
Standard Screen mode allows the data flow and port distribution to be programmed manually with
a visual interface.
•
Complex Screen mode allows the configuration to be entered in a flow chart by driver number, port,
and panel number, as well as dimensions and offset coordinates in pixels.
Page 25 of 31
www.chauvetdj.com/products/vivid-drive-
Vivid Drive 23N User Manual Rev. 1
Operation
Advertisement
Table of Contents
