Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Chauvet DJ COLORband Q3BT
Summary of Contents for Chauvet DJ COLORband Q3BT
- Page 1 User Manual...
-
Page 2: Table Of Contents
Control Panel Operation................... Menu Map ........................ Configuration (DMX) ....................Starting Address......................DMX Channel Assignments and Values ..............16Ch..........................COLORband Q3BT Zones for DMX control (16Ch)............6Ch..........................4Ch..........................Configuration (Bluetooth) ..................Configuration (Standalone) ..................Automatic Program ......................Auto Program Speed ...................... -
Page 3: Before You Begin
Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, and COLORband Q3BT are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies. -
Page 4: Safety Notes
Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document. Page 2 of 14 COLORband Q3BT User Manual Rev. 3... -
Page 5: Introduction
Introduction 2. Introduction Product Overview Safety loop Power Fuse Power Microphone Menu holder in/out buttons display Product Dimensions 39.3 in 1000 mm 3.8 in 98 mm 5.5 in 140 mm COLORband Q3BT User Manual Rev. 3 Page 3 of 14... -
Page 6: Setup
3. Setup AC Power The COLORband Q3BT has an auto-ranging power supply, and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. -
Page 7: Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The COLORband Q3BT may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming. -
Page 8: Operation
Chauvet & Sons, LLC is under license. Other trademarks and trade names are those of their respective owners. Configuration (DMX) The COLORband Q3BT works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website http://www.chauvetlighting.com/downloads/ DMX_Primer_rev05_WO.pdf. -
Page 9: Dmx Channel Assignments And Values
229 255 Auto program 8 000 250 Program speed, slow to fast Auto Speed 251 255 Sound-active mode Dimmer 000 255 0–100% COLORband Q3BT Zones for DMX control (16Ch) Channel Function Value Percent/Setting 000 255 0–100% Green 000 ... -
Page 10: Configuration (Bluetooth)
Operation Configuration (Bluetooth) The COLORband Q3BT can be operated with the BTAir application over a Bluetooth connection. 1. Download and install the BTAir app from your preferred app store. 2. Press <MENU> repeatedly until bLE shows on the display. 3. Press <ENTER>. -
Page 11: Dimmer
4. Press <ENTER>. IRC-6 Infrared Remote Control The COLORband Q3BT is compatible with the IRC-6 infrared remote control from Chauvet. To enable or disable the IR mode on the COLORband Q3BT, follow the instructions below: 1. Press <MENU> repeatedly until SEt shows on the display. -
Page 12: Master/Slave Mode
The Master/Slave mode allows a single COLORband Q3BT product (the “master”) to control the actions of one or more COLORband Q3BT products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in standalone or with the IRC-6, while the slave products will be set to operate in Slave mode. -
Page 13: Maintenance
6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. COLORband Q3BT User Manual Rev. 3 Page 11 of 14... -
Page 14: Technical Specifications
Maximum External Temperature Cooling System 104 °F (40 °C) Convection I/O Connector Channel Range 3-pin XLR 4, 6 or 16 Ordering Product Name Item Code UPC Number COLORband Q3BT 10031572 781462219208 Page 12 of 14 COLORband Q3BT User Manual Rev. 3... -
Page 15: Returns
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). COLORband Q3BT User Manual Rev. 3 Page 13 of 14... -
Page 16: Contact Us
Visit the applicable website above to verify our contact information and instructions to request support. Outside the US, UK, Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record. Page 14 of 14 COLORband Q3BT User Manual Rev. 3...